How can we help you?

How do I fit my Hive Window or Door Sensor?


To fix your Hive Window or Door Sensor in place please follow the below guidance. Remember that removing the adhesive strips from paint can leave marks.

- Check your sensor’s signal before fixing it in place. You can do this in the Hive app or online dashboard under Manage devices

- One part of the sensor goes on the door and the other part goes on the frame. Arrange both parts so that the marked strips are aligned as shown below:
User-added image
The sensor parts should ideally be no more than 10mm apart when the door, cupboard or window is closed so that they trigger when opened

1. Peel the smallest strip from the backing paper and stick to the smaller part of the Hive Window or Door Sensor

2. Stick the biggest strip to the bigger part of the sensor

3. Wipe the area on the door or window frame where the adhesive strips will be attached and allow to dry

4. Remove backing from the adhesive strips so that you can firmly place the sensor on the door or window frame

5 .When fixing the sensor in place, ensure there is enough space to slide open the case for future battery replacement

 


Rate this article

Thanks for rating this article

How can we help?

If the above article does not answer your question, please try contacting our customer support team by sending us a message.

Dev Tools
AB tests
AB.bnaUpsell
AB.hhpMoneyBackGuarantee
AB.navigationV2
AB.pricePeriod1
AB.pricePeriod2
AB.evUntethered899
AB.evUntethered969
AB.evUntethered999
AB.proInstallBannerA
AB.proInstallBannerB
Environments