Shop

Sync Energy 2

Robust and built to last, the Sync makes all the features of Hive charging even more affordable. So greener, cheaper driving could be closer than you think.

Buy now

Save up to

25%

on charging with Power+¹

Enjoy a

3 year

warranty

Join over

35,000

Hive drivers

Smarter charging without the spreadsheet

The Sync makes controlling your charging simpler and more convenient than ever. It’s loaded up with intelligent features to help you save money on every drive. All you need to do is plug in.

Works with any electric vehicle

The Sync is fully compatible with all EVs and plug-in hybrids with a Type 1 or 2 connection. And you can pair it with any electricity tariff too.

Relax with a 3 year warranty

Get it installed by our approved experts and enjoy 3 years worry-free (or 2 years without installation).

Made for the British weather

Thanks to its sturdy weatherproof shell, the Sync is designed to keep charging come rain or... more rain.

Logo

You could drive 9,000 miles for only £162 with Power+ ¹

Pair your charger with any British Gas tariff to get 25% off your electricity every time you charge with Power+. Just park up, plug in and we’ll automatically charge when energy’s at its cheapest and greenest. Then we’ll credit your savings back your energy bill. Easy! Savings are based on the British Gas EV Power v2 tariff (as of 17/10/2025), assume 3.3 miles/kWh efficiency, and require all charging to occur in Power+ mode during off-peak hours managed by Hive.¹

Here's why we love it:

Exclusive to Hive connected chargers

Works with any British Gas electricity tariff (get yours here)

All you need is a smart meter

Cutting-edge tech that’s built to last

Take a closer look at what makes the Sync Energy 2 charger so smart.
Sync Energy 2 EV Charger

7.4kW fast charging

That’s powerful enough to fully charge the average EV battery in under 8 hours.

Better connectivity

Works with both WiFi and 4G networks, so you’ll stay connected even if you’ve got poor signal.

Enhanced safety features

Including PEN fault detection, RCD and DC leakage protection to keep you and your home safe.

Tough by design

A robust outer shell that’s made to withstand the elements – without sacrificing on looks

Alternative Logo

Get 100 miles FREE public charging with Zapmap

Choose your Hive EV charger and get £20 credit to spend at over 25,000 Zapmap chargepoints across the UK. That’s equivalent to 100 miles, on us!²

Tell me more

Tap into smarter charging with the Hive app

Image of a phone with a rock

Save on every charge with Power+

Join any British Gas electricity tariff, switch on Power+ in your Hive app and and we’ll automatically charge your EV when energy’s at it’s greenest and cheapest (usually overnight). Then it'll work out how much you've spent and credit 25% of it back to your energy bill.¹

Keep an eye on your spending

Sync your app with your electricity tariff in just a few taps to see exactly how much you’re spending in pounds and pence. And if you’ve got a dedicated EV tariff, it’ll prioritise charging during cheaper hours too.

Check your charging as it happens

Get accurate real time updates whenever you’re plugged in and charging up. See how long you’ve got left on your charge and get notified when it’s finished. Want to look back on past charges? Your Charging History tab keeps it all in one place.

Our trusted EV installers

Choose a safe and hassle-free EV charger installation from our approved experts.
British Gas
Alternative Logo

Trusted in millions of homes nationwide, British Gas are experts in installing the latest green tech – including EV chargers. Their network of approved installers will get you set up in no time.

ChargedEV
Alternative Logo

Having fitted over 60,000 of them, ChargedEV are one of the leaders in EV charger installations. They’ve won over 10 industry awards and are rated 4.9 out of 5 on Trustpilot. UK mainland only.

Installed in just 4 simple steps

Expert recommended

And don’t forget your British Gas tariff

Once it’s installed, pair with any British Gas electricity tariff to unlock 25% off with Power+.¹

1

Submit your details

Answer a few simple questions to confirm where you’d like your home EV charger installed.

2

Get your quote

Your installer will review your details and send you a personalised quote to fit your Hive EV charger.

3

Upload photos

Accept your quote, upload photos of your home and your installer will start planning for the big day.

4

Get it installed

Our approved experts will fit your EV charger on a day that suits you, usually within 4-5 hours.

Expert recommended

And don’t forget your British Gas tariff

Once it’s installed, pair with any British Gas electricity tariff to unlock 25% off with Power+.¹

Here's what Hive customers think...

“Great service from start to finish.”

Great service from start to finish. Good communication, easy to ask queries. Engineer - Ethan was friendly, professional and unobtrusive. Left everything clean and tidy when they left.

August 2024

“Amazing customer care”

ChargedEV has been providing amazing customer care, good follow up and progress of my order, engineer arrived the day and time I was informed. Stuart, the engineer who visited to install our charger, was very polite and professional.

July 2023

“Would definitely recommend”

Rick was amazing..very efficient and talked us through the whole process..very neat job and no mess..very happy with the service would definitely recommend.

November 2024

Very high standard

Engineer was on time, courteous and professional. Worked without a break taking time to ensure my wishes were taken on board. Work was completed neatly and to a very high standard. Wouldn't hesitate to recommend to others.

August 2025

Tech specifications

Hardware Features
7.4 kW fast charging
Built-in open PEN fault protection
Integrated 30 mA Type A RCD + 6 mA DC leakage detection
Load management / power balancing
Cable Options (untethered)
Socketed (Type 2 → Type 2, or Type 2 → Type 1 with adaptor)
Tethered options with fixed Type-2 cable
Dimensions
Width: 223mm
Height: 297mm
Depth: 121mm
Weight
4–5 kg (depending on socket or tethered model)
Connectivity
4G
WiFi
LAN (Ethernet)
Power Supply
Mains powered
Usage
For outdoor and domestic use

Frequently asked questions

What is a standard installation?
If you’re buying a charger and installation through ChargedEV, find out more on ChargedEV’s website here.
If not, for example you've been referred to Hive by one of our industry partners, or are having a British Gas arranged install, a standard install is this:

Our standard installation includes a remote home check (if required) plus EV charger installation by a certified approved engineer:

  • Your Hive EV charger attached to an accessible external wall

  • 10m of charger supply cabling (Tuffex) connected (with a maximum of 5m internal)

  • 1 external wall breakthrough

  • Matt:e O:Pen and load management / curtailment device fitted (where appropriate)

  • 3-year warranty on the charger and installation

If our engineer finds anything that needs further investigation, or additional work, during your installation, they'll let you know what needs to happen next before they can continue.
> Find out more about what happens on the day of your install
How will I know if I am having a ‘standard’ install?
If you’re buying a charger and installation through ChargedEV, find out more on ChargedEV’s website here.
If not, for example you've been referred to Hive by one of our industry partners, British Gas will conduct a no obligation virtual survey of your home so we will know if it's suitable for a standard installation. If your home requires additional works before a charger can be installed, British Gas will provide you with a quote detailing what needs doing, along with the associated costs. If you choose not to go ahead, we can cancel your order and will refund your deposit.
I'm an installer. What should I know before completing the installation?
You must:
  • Be a suitable qualified electrician with relevant training, qualifications and / or certifications to complete the work

     

  • Complete the installation in accordance with:

    • Hive EV Charging user guides

    • Any applicable laws and / or regulations including, but not limited to, IET Wiring Regulations (BS 7671) and the IET Code of Practice for Electric Vehicle Charging Equipment Installations

    • Distribution Network Operator (DNO) requirements. DNO approval or acknowledgement must be obtained before or after the installation.

  • Provide the following to the user or property developer after the installation:

    • BS7671 Electrical Installation Certificate

    • DNO approval or acknowledgement

Is the charger controlled via WiFi or a mobile network?
The Hive EV charger connects via WiFi and a GPRS mobile network - this means if your internet is down or Wi-Fi signal is poor, you’ll still be able to connect to your charger. If you live in an area with poor mobile signal, please flag this during the Virtual Home Check. We’ll then be able to advise if Hive EV charging is the right solution for you.
What is a Matt:e R or Matt:e T device?
The Matt:e device measures the voltage of your EV charge point to make sure it stays within a pre-set, safe operating limit. If the Matt:e device detects voltage outside of this range, it may result in a loss of effective earth. If this happens, the Matt:e device will disconnect the charger to ensure that customers are not at risk.
What is a Load Management Device?
A domestic property has a maximum load allowable by the Distribution Network Operator (normally 60, 80 or 100 amps). Where you can’t upgrade the allowable load of the home further, an electrical services upgrade or Load Management Device is needed.
Getting a Load Management Device allows you to install an EV Charger when you would otherwise be unable to under the normal allowable load.
What is a DNO and how can I tell who my DNO is?
DNO stands for Distribution Network Operator. These are the organisations who are licensed to distribute electricity in the UK. DNOs own and operate the system of cables, towers and substations that bring electricity from the national network to our homes and businesses.
You can find out who your local DNO is by typing in your postcode on the Energy Networks website.
Why does the DNO need to know about my charger installation?
If you’re buying a charger and installation through ChargedEV, they will inform you of any relevant information.

If not, for example you've been referred to Hive by one of our industry partners, or are having a British Gas arranged install, the following information is for you:

All electric vehicle charge point installers need consent from the Distribution Network Operator. As such, British Gas must report planned electrical work to gain permission to add more electrical load to the area.

Our team will calculate the increased load your EV charger will need in your home and therefore your local area.
Depending on your home we may need to check in advance if that is okay with DNO (although in 70% of cases we can do this after the installation).
For DNO checks needed in advance of your install, we will handle the initial DNO submission for you. After the initial submission to the DNO, the DNO will work with you direct to make sure we can fit the EV charger. This may involve additional assessments or even upgrade work. We will stay in touch with you along the way to ensure the DNO are progressing with your application.
What happens on the day of my install?
If you’re buying a charger and installation through ChargedEV, find out more on ChargedEV’s website here.
If not, for example you've been referred to Hive by one of our industry partners, the following information is for you:
We’ll agree a date with you for your installation and confirm this by email along with the time when the engineer will arrive. Installation can time vary, but please allow around half a day. The engineer will call ahead to let you know they’re on the way.
To make sure your install goes ahead smoothly, it's best to carry out these checks before the engineer arrives:

  • If you don’t already have the Hive app, we would advise you download it prior to the installation day to your smart phone or device as the engineer will talk you through how we pair your new charger to the app.

  • Make sure someone over 18 is available to meet our engineer, answer any questions and stay with them throughout the appointment.

  • The engineer may need to switch off your electricity supply to install your charger. So, it's a good idea to switch off any appliances or electronic equipment that may be affected, including any household alarms, before we start your installation.

  • Make sure there's clear access to the area where you want the charger installed. For example, we'll need to access any locked gates or cupboards.

  • Please make sure young children and pets are kept safely out of the way.

The engineer will also check any additional work that has has been completed by a third party as we'll need to check it before we install your charger. If our engineer finds anything that needs further investigation during your appointment, they'll let you know what needs to happen next before we continue with your installation.
What if I need to change the date of my installation?
If you’re buying a charger and installation through ChargedEV, find out more on ChargedEV’s website here, or contact them on 0330 043 1851.
If not, for example you've been referred to Hive by one of our industry partners, or are having a British Gas arranged install, the following information is for you:
If you need to reschedule, please call our EV team on 0333 202 1054* (you can find our latest opening hours here) and they'll help you arrange an alternative date.
Is there a warranty on the charger?
Yes, we provide a British Gas backed warranty on the charger. Full details can be found in the Warranty section of our Hive EV Charger Terms & Conditions.
> View Hive EV Charging Installation Terms & Conditions (PDF 139KB)
Who are ChargedEV and what happens if I want to buy a charger with installation?
If you choose to buy a charger with installation, we’ll introduce you to ChargedEV. You will purchase both the charger and installation directly from them. Hive is not involved in this process, and all terms are between you and ChargedEV.
Do I get a warranty if I buy my charger and installation through ChargedEV?
If you buy your charger and installation through ChargedEV, you’ll get ChargedEV’s warranty. All warranty terms are agreed directly with ChargedEV and not with Hive.

Installing your EV charger

What is a standard installation?
If you’re buying a charger and installation through ChargedEV, find out more on ChargedEV’s website here.
If not, for example you've been referred to Hive by one of our industry partners, or are having a British Gas arranged install, a standard install is this:

Our standard installation includes a remote home check (if required) plus EV charger installation by a certified approved engineer:

  • Your Hive EV charger attached to an accessible external wall

  • 10m of charger supply cabling (Tuffex) connected (with a maximum of 5m internal)

  • 1 external wall breakthrough

  • Matt:e O:Pen and load management / curtailment device fitted (where appropriate)

  • 3-year warranty on the charger and installation

If our engineer finds anything that needs further investigation, or additional work, during your installation, they'll let you know what needs to happen next before they can continue.
> Find out more about what happens on the day of your install
I'm an installer. What should I know before completing the installation?
You must:

  • You’ll need an EO-certified EV expert to install your charger and validate your warranty. Find your nearest one here

  • Complete the installation in accordance with:

    • Hive EV Charging user guides

    • Any applicable laws and / or regulations including, but not limited to, IET Wiring Regulations (BS 7671) and the IET Code of Practice for Electric Vehicle Charging Equipment Installations

    • Distribution Network Operator (DNO) requirements. DNO approval or acknowledgement must be obtained before or after the installation.

  • Provide the following to the user or property developer after the installation:

    • BS7671 Electrical Installation Certificate

    • DNO approval or acknowledgement

About our interest-free loan

What does the loan cover?
V12 finance is not offered on charger or installation purchases through ChargedEV.
V12 Finance covers your charger and standard installation, or just your charger if you are buying a charger only, through Hive.
Every property is unique so we tailor each installation individually. Many homes are suitable for standard installation, but some may need additional parts and labour. Because your loan is agreed before we confirm your installation requirements, it can only cover standard installation.
Will there be any further costs, and how will this impact the loan?
V12 finance is not offered on charger or installation purchases through ChargedEV.
If you are buying a charger with installation through Hive, we'll do a physical or virtual survey to see if your home is suitable for standard installation. If not, we'll give you a separate quote to cover any additional work needed.
It’s very rare, but a virtual survey may not capture everything so on arrival your engineer may discover that extra work is required. In that case, they’ll explain your options and any extra costs before starting work.
How do I get an interest-free loan?
V12 finance is not offered on charger or installation purchases through ChargedEV.
If you are purchasing your charger and installation through Hive, choose the 'Pay monthly' option at checkout. You’ll be automatically directed to V12 Retail Finance where you’ll be asked for your details to apply for the loan.
V12 Retail Finance will review your application (including credit search and affordability checks), and if approved, you will be asked to sign the loan agreement electronically.
If you decide to cancel your order or we’re unable to fulfil it for any reason, we will cancel your loan.
Hive is a credit broker, not a lender and introduce you to Secure Trust Bank PLC T/A V12 Retail Finance who provide the loan.
Hive is a trading name of British Gas New Heating Limited. Registered in England & Wales (No. 06723244). British Gas New Heating Limited is an Appointed Representative of British Gas Services Limited which is authorised and regulated by the Financial Conduct Authority. Both registered at: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD.
When will my repayments start?
V12 finance is not offered on charger or installation purchases through ChargedEV.
Your monthly repayments will begin one month after we install your charger. If you are buying a charger only, your monthly repayments will begin after your charger has been dispatched.

Get more from Hive

  1. Save 25% on the electricity used to charge your Hive-connected EV charger, applied as a credit to your electricity account. Power+ is only available to customers with a compatible EV charger, a British Gas electricity tariff, and a smart meter in credit mode; savings are based on the British Gas EV Power v2 tariff (as of 17/10/2025), assume 3.3 miles/kWh efficiency, and require all charging to occur in Power+ mode during off-peak hours managed by Hive.

  2. Your £20 charging credit equates to an average of 100 miles of free charging. That assumes 4 miles per kWh (based on a Volkswagen ID3) at 81p per kWh via a rapid or ultra rapid charger, as per Zapmap’s 2025 price index. Actual mileage may vary depending on your vehicle capacity.