How can we help you?

How do I view or change my heating schedule using my Hive Active Heating 1 thermostat?

if you have the older version of the Hive thermostat as shown, follow the below steps.

If you have the newer version of the thermostat follow these steps.

User-added image

Your thermostat can automatically change the temperature in your home according to a schedule you set. You can set this through the Hive app, online dashboard, by text message or on the thermostat itself.

You can set the schedule using your thermostat as follows: First, wake up your thermostat from power save mode by pressing either the < or > button. The screen will now be lit up. You can access your heating schedule by pressing the > button and holding it for 2 seconds.

To access your hot water schedule press and hold the < button for 2 seconds.

To adjust your heating schedule on the thermostat, simply press > for two seconds and the display will change to show EDIT AUTO. Now you can update your schedule.

1. Press > to select AUTO and decide to schedule each day individually (“7 day” mode) or for the weekdays and weekends (“5 day / 2 day” mode) using + and - buttons.

2. Press > to select DAY and choose the day to edit (e.g. “Mon” or “Mon-Fri”) using the + and - buttons.

3. Each time your schedule changes this is known as an ‘event’. Press > to select EVENT and choose the one you want to edit for this day (e.g. "Event 1") using the + and - buttons.

4. Press > to select TIME and set the time at which you want your heating temperature to change (e.g. "07:00") using the + and - buttons.

5. Press > to select HEAT and set the temperature you want your room to be at (e.g. "18.5°C" or "OFF") using the + and - buttons.

6. Continue this process until you have set all of your events

7. That’s it, just leave your thermostat for about 15 seconds and it will save your settings and return to the main display.

Rate this article

Thanks for rating this article

How can we help?

If the above article does not answer your question, please try contacting our customer support team by sending us a message.

Dev Tools
AB tests